accepts any of up to six different coins or tokens.
X-Mark codes and optionally detects the
presence of SmartMark.
0.65" to 1.47" (16mm to 37mm), straight drop configuration.
coin shaving by measuring coin diameter
to +/-.005" typ.
alloy 3 ways.
Accepts up to 20
coins per second.
Slide on access
covers shed spilled liquids.
release and opening coin chute.
New coin types can
be field programmed without extra
indicator LED for operational
status and field diagnostics.
electrical interface compatibility with existing legacy machines
and new machines via Personality Plug
and tracked with optional X-Key and
X-Tracker PC software.
facets form a code in the surface of a token and are read by
X-Mark Xeptors to verify that the token is not just some melted
lead slug or punched piece of metal having diameter and alloy
the same as your token. If you want to eliminate slugs and
crossplay then you need X-Mark tokens and Xeptors.
The X-10 has unique small geometry metal sensor
coils that measure the signature of the coin on both the edge
and the center of the coin. The large, oblong and deep-seated
coils of other acceptors haven’t a real chance of separating the
signatures of edge and center alloys.
Precision optical diameter
measurement with 0.005” resolution allows the X-10 to eliminate
the shaved coin problem that plagues simple comparators and
results in tricking hopper counters to overpay customers. The
solution: Just Don’t Accept Shaved Coins!
Your best customer can insert 10 to 15 coins per
second. With Triple Track Technology, the X-10 can
measure, track, and properly credit as many a 3 coins
simultaneously traveling down the coin chute,
resulting in an unrivaled speed of over 20 coins per second. You
can't beat that!
Credit Optics Logic
All IDX Xeptors
optionally can be ordered with built-in credit optics. The
X-10’s sophisticated sequencing and timing logic combine
information from the credit sensors and other internal sensors
to provide a complete defense against stringing, soda straw
tricks, and taped coins, based on coin speed, direction and
Personality plugs adapt a single Xeptor model to
any of many industry standard electrical interfaces. More than a
dozen Personality Plug modules are available to ensure
compatibility with machines requiring any of 24VAC, 24VDC,
12VDC, Tilt, Credit, Sense, and Inhibit signals… or custom..
can be manually programmed in the field for the coins they are
to accept. When programmed with the X-Key attached, the Xeptor
thereafter secures itself such that manual programming can no
longer be done unless the X-Key is again attached. This is
access control for internal casino security.
Xeptors are the only coin acceptors designed to
shed spilled liquid. No exposed card edges, no gaping holes for
wires and pots. We just keep all of that sticky conductive
Stop digging bent
coins out of comparators with screwdrivers that just rip them
up. Even those half-flap acceptors require the screwdriver
treatment now and then. Only Xeptors are deigned to fully open
on your command.
Mr. Xeptor never
sleeps on the job. When no coins are coming through, he is busy
re-calibrating the nine optical sensors and two inductive
sensors. He also tracks long term coin data averages so
acceptance windows for coins stay centered and perfectly tuned.